There are countless ways to improve productivity on your Haas machines, and one is as simple and cost-effective as replacing standard flood coolant with a high-pressure coolant system. The most obvious advantage of high-pressure coolant is that it enables faster and deeper cuts than with flood coolant. But there’s much more:
- Because it significantly reduces heat within the cutting zone, high-pressure coolant enables faster spindle speeds and feed rates, thus reducing process time and cost-per-part.
- By more effectively flushing chips from the tool and workpiece, you can perform more efficient deep hole drilling and blind ID boring.
- High-pressure clears chips faster so you don’t waste time re-cutting which, along with reduced heat in the cutting area, promotes longer tool life.
- Chips that aren’t cleared from the cutting zone can scratch the workpiece. High-pressure systems protect part surface finishes.
- By reducing heat and keeping the cut zone clear, high-pressure coolant lets you drill to depth in a single pass and with less tool wear versus peck drilling.
The Haas high-pressure system delivers up to 1,000 PSI (69 bar) has a 3 hp (2.2 kW) motor that runs off of the machine’s power source, and has an automatic cleaning function on the pump intake.
To learn more call your Torrance Haas Factory Outlet. Call (310) 381-0750, email: jphillips@haasfactoryoutlet.com, or visit www.haasfactoryoutlet.com.