Planned Preventative Maintenance.jpg

 

Proper maintenance is important to protect your investment in Haas machine tools. To help you keep your Haas in top condition, we offer an annual PM inspection service so you'll know if any serious problems are developing. With this option, you'll get the annual inspection to have the confidence that your machine is in top operating condition. However, you will be responsible for the cost of any repairs that are necessary.


HERE'S WHAT'S INCLUDED WITH A PREVENTATIVE MAINTENANCE INSPECTION:


Coolant and Air System

  • Inspect Coolant Hoses
  • Verify operation of coolant motor
  • Inspect all air hoses and air system components
  •  Inspect spindle air blast*

 Mechanical System

  •  Verify machine level
  • Check spindle lube
  • Clean and decontaminate Axis guides and screws
  • Check spindle orientation alignment
  • Inspect drive belts*
  • Inspect turret indexing system (Fuse Level)*
  • Verify turret to spindle parallelism*
  • Inspect way covers and wipers
  • Inspect spindle encoder operation
  • Verify gearbox/motor operation
  • Inspect Tool Changer and lubricate*
  • Inspect spindle taper condition*

 

*If applicable 

Way Lube system

  • Inspect filter
  •  Inspect hoses and fittings
  • Check pump operation / test
  • Check/adjust pressure spindle regulator
  •  Inspect system for leaks

 Electrical Systems

  • Clean electrical cabinet*
  • Check voltages
  •  Inspect connections and terminals
  •  Inspect electrical ground connections
  •  Replace or clean filter fan*
  •  Check limit switches and safety locks
  •  Check Axis motors and cables

 Optional Special Services

  • Spindle Vibration Analysis Test
  •  Renishaw BallBar Test
  •  3-Axis Laser Calibration (Not performed during PM visit)

 


 

 

*Pricing below is for the on-site time for the basic PM inspection only. Travel will be charged at our normal zone travel rates. It is expected that upon arrival the machine will be immediately ready to begin the inspection work. Click button below for a detailed description of the preparations that we expect customers to make prior to the PM inspection.


Pre-PM Checklist

  MACHINE TYPE PM ONLY

 
  Tool Room, Office & Mini Machines $795
  Tool Room Mills
Tool Room Lathe (Except 15 and 25)
Office Mill or Lathe
Mini Mills
 
 
  Small Mills $995
  VF-1 through VF-5 (No APC)
Drill Tap/DM
Gantry Routers (GR/SR)
 
 
  Large Mills $1,495
  VF-6 to VF-12
EC 400-500 (No Pallet Pool)
VS-3
Small VF w/ APC
 
 
  Complex Mills $1,595
  Large HMC EX1600 & HS
Any pallet pool machine
UMC
 
 
  Small Lathe $995
 

ST-10/15
ST-20/30
TL-15 & TL-25
ST-35

 
 
  Large Lathe & Y-Axis $1,295
  Any Y-Axis Lathe regardless of size
ST-40 and larger
Any size Dual Spindle
 


  OPTIONAL SERVICE
(Special pricing available when done at the same time as PM. Applicable to all models.)
ADDITIONAL COST

 
  Ball Bar Calibration $195
 
 
  Vibration Analyzer Test $195
 
 
  3-Axis Laser Calibration  
  Small Mills (VF-1 to VF 5) $2,500
  Large Mills (VF-6 to VF 12)  $3,500
 

Request a Quote